2026-07-05T18:22:30Zhttps://www.radar-service.eu/oai/OAIHandler

10.35097/suqqybeg38gdk83t2026-07-01T09:02:48ZIMKradar4kit

10.35097/suqqybeg38gdk83t Erdmann, Anselm Anselm Erdmann Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research Troposphere Research Gasch, Philipp Philipp Gasch Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research Troposphere Research Karlsruhe Institute of Technology 2026 2026 Atmospheric Science Doppler lidar wind profiles TEAMx KITcube MOSES_2025_Alps LIVAVERT(EX)² AtmoProKIT ACTA Open Access Creative Commons Attribution 4.0 International Karlsruhe Institute of Technology https://ror.org/04t3en479 Wieser, Andreas 0000-0003-1266-5432 Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research Troposphere Research Wind profiles processed from measurements of the Doppler lidar Leosphere WLS200s_159 located at Gargazon, Italy (46.5767°N, 11.2°E, 255 m) during the TEAMx field campaign from May to July 2025. The instrument was placed on a container with 2.59 m height. The heights and the altitude refer to the position of the instrument. For the wind profile calculation, DBS, vertical stares, and RHI scans are used. RHI scans were carried out in four directions (along- and cross-valley). The vertical profiles of the 3D wind vectors are calculated using AtmoProKIT v1.1 with the standard module chain (https://doi.org/10.5194/gmd-19-2497-2026). The default values of the standard module chain are used for all processing parameters, except of the minimum elevation angle. To avoid hard targets (surrounding mountains), the minimum elevation angle for considered measurements is set to 30°. The temporal resolution of the processed wind profiles is 10 min and the vertical resolution is 100 m. Doppler lidar Leosphere WLS200s AtmoProKIT standard module chain with a minimum elevation angle of 30°. ITALY 11.2 46.5767 29,9 MB application/x-tar