| Name | Speichervolumen | Metadaten | Upload | Aktion |
|---|
Alternativer Identifier:
(KITopen-DOI) 10.5445/IR/1000093534
Ersteller/in:
Kiseleva, Olga [Kiseleva, Olga]
Adler, Bianca [Adler, Bianca]
Kalthoff, Norbert [Kalthoff, Norbert]
Kohler, Martin [Kohler, Martin]
Wieser, Andreas [Wieser, Andreas]
Wittkamp, Niklas [Wittkamp, Niklas]
Beitragende:
-
Titel:
Data set of meteorological observations (wind, temperature, humidity) collected from a microwave radiometer and lidar measurements during four intensive observations periods in 2017 and 2018 in Stuttgart, Germany, under the BMBF Programme ‘Urban Climate Under Change’ [UC]2).
Weitere Titel:
-
Beschreibung:
(Abstract) Die meteorologischen Daten zu den Temperatur-, Feuchte- und Windfeldern wurden während vier Messkampagnen in Stuttgart im Sommer 2017, Winter 2017, Sommer 2018 und Winter 2018 erhoben. Doppler Lidarsysteme und ein Mikrowellenradiometer wurden zur Erfassung und zur Analyse der horizontalen Struktur des innerstädtischen Windfeldes und der vertikalen Struktur der urbanen Grenzschicht eingesetzt. Die Messungen wurden im Rahmen des Verbundprojekts „Dreidimensionale Observierung atmosphärischer Prozesse in Städten (3DO)“ durchgeführt. 3DO gehört zu einem der drei Module der BMBF-Fördermaßnahme Stadtklima im Wandel (UC2).
Mehr Information über Ziele der UC2 Fördermaßnahme ist auf http://www.uc2-program.org/ und in den aufgelisteten Übersichtspublikationen zu finden.
Dieter Scherer, Felix Ament, Stefan Emeis, Ute Fehrenbach, Bernd Leitl, Katharina Scherber, Christoph Schneider, and Ulrich Vogt (2019): Three-Dimensional Observation of Atmospheric Processes in Cities. Meteorologische Zeitschrift 2, 2019. doi: 10.1127/metz/2019/0909.
Dieter Scherer, Florian Antretter, Steffen Bender, Jörg Cortekar, Stefan Emeis, Ute Fehrenbach, Günter Gross, Guido Halbig, Jens Hasse, Björn Maronga, Siegfried Raasch, und Katharina Scherber (2019): Urban Climate Under Change [UC]2 – A National Research Programme for Developing a Building-Resolving Atmospheric Model for Entire City Regions. Meteorologische Zeitschrift 2, 2019. doi:10.1127/metz/2019/0913.
(Abstract) This dataset of meteorological observations (temperature, humidity, wind) was collected during four field campaigns in Stuttgart, Germany, in summer 2017, winter 2017, summer 2018, and winter 2018. Doppler lidars and a microwave radiometer were deployed to investigate horizontal structures of intra-urban horizontal wind field patterns and vertical structures of the urban boundary layer. The measurements were conducted within the project ‘Three-dimensional Observation of Atmospheric Processes in Cities’ (3DO). 3DO is one of three modules of the programme ‘Urban Climate Under Change’, [UC]2, funded by the German Federal Ministry of Education and Research (BMBF). More information on the goals of the UC]2 programme can be found on http://www.uc2-program.org/ and in the overview papers listed below. Dieter Scherer, Felix Ament, Stefan Emeis, Ute Fehrenbach, Bernd Leitl, Katharina Scherber, Christoph Schneider, and Ulrich Vogt (2019): Three-Dimensional Observation of Atmospheric Processes in Cities. Meteorologische Zeitschrift 2, 2019. doi: 10.1127/metz/2019/0909. Dieter Scherer, Florian Antretter, Steffen Bender, Jörg Cortekar, Stefan Emeis, Ute Fehrenbach, Günter Gross, Guido Halbig, Jens Hasse, Björn Maronga, Siegfried Raasch, und Katharina Scherber (2019): Urban Climate Under Change [UC]2 – A National Research Programme for Developing a Building-Resolving Atmospheric Model for Entire City Regions. Meteorologische Zeitschrift 2, 2019. doi:10.1127/metz/2019/0913.
(Technical Remarks) ### **DATA SET DESCRIPTION** ### **1. Spatial coverage** The measuring data were collected during intensive observation periods (IOP) in Stuttgart, Germany, under the BMBF Programme ‘Urban Climate Under Change’ [UC]2. ### **2. Temporal coverage** 01.02.2017 - 31.08.2018 ### **3. Data file structure and variables** The parent UC2_IMK_TRO_KIT data folder contains archived directories, corresponding to a particular measuring device (***WINDCUBE8, RPG_HATPRO_G4*** and ***VIRTUAL_TOWERS*** ). ***WINDCUBE8*** folder contains files of wind vectors measurements at different heights retrieved from Windlidar WINDCUBE8. ***RPG_HATPRO_G4*** folder contains data files from microwave radiometer measurements. The stored variables are cloud liquid water content, atmosphere mass content of water vapor, infrared radiometer brightness temperature, air pressure, as well as vertical temperature profiles and vertical absolute humidity profiles. ***VIRTUAL_TOWERS*** folder contains profiles of horizontal wind retrieved with the dual-Doppler Lidar technique ‘Virtual towers’. ### **4. Devices and Locations** The Doppler wind lidar WINDCUBE8 (WLS8-3 manufactured by Leosphere) was located on a rooftop of the city hall in the city centre (48.774667°N / 9.178287°E). The name of this location is cityhall. This abbreviation is the part of file name; see paragraph 6. The microwave radiometer (RPG HATPRO G4) manufactured by RPG-Radiometer Physics GmbH was located on a rooftop of the city hall tower in the city centre (48.775017°N / 9.177928°E). The name of this location is cityhalltow. This abbreviation is the part of file name; see paragraph 6. The six virtual towers were located in the Stuttgart city basin and in the Neckar valley. The names and coordinates of the six virtual towers are: wolfram (48.792912°N / 9.180950°E), citycannstat (48.788833°N / 9.190096°E), citywera (48.787575°N / 9.194673°E), naehter (48.780160°N / 9.226197°E), bcmercedes (48.787883°N / 9.233923°E), uthbherzogen (48.794566°N / 9.245064°E). These abbreviations are the parts of file names; see paragraph 6. ### **5. Type of files** WINDCUBE8, RPG_HATPRO_G4, VIRTUAL_TOWERS folders contain NetCDF-files created using Matlab R2016b regarding CF-1.7 convention. ### **6. The file name** The name of the NetCDF-file consists of some abbreviations: ***campaign-location-site-acronym-data_content-origin_date-version.nc*** Example: ***IOP02-S-cityhall-KITimktro-meteo-20170815-1.nc*** ***campaign***: IOP0X , where X is the number of an IOP. X=1: February-March 2017. X=2: June-August 2018. X=3: January-March 2018. X=4: June-August 2018. ***location***: S indicates Stuttgart. ***site***: i.e cityhall stands for location of WINDCUBE8. See paragraph 4. ***acronym***: KITimktro, stands for Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research, Department Troposphere Research. ***origin_date***: measuring date in the format YYYYMMDD (year, month, day) YYYYMMDD. ***version***: 1 ***data_content***: see paragraph 7. ### **7. Data content** ***WINDCUBE8*** folder contains data files with two different data contents: ***meteo*** and ***w***. The data file with the content ***meteo*** includes time series profiles of eastward (***ua***) wind and northward wind (***va***) vectors averaged over 10 minutes periods. The data file with the content ***w*** includes time series profile of vertical wind velocity (time resolution of 7 sec). ***RPG_HATPRO_G4*** folder contains data files with three different data types: ***meteo***, ***ta***, ***haa***. ***meteo*** includes time series of atmosphere cloud liquid water content (***lwp***), atmosphere mass content of water vapor (***prw***), infrared radiometer brightness temperature (***tb***), and air pressure (***plev***) from microwave radiometer measurement (time resolution of 4 sec). ta includes vertical temperature profiles (time resolution of 15 min) and ***haa*** contains vertical absolute humidity profiles (time resolution of 4 sec). ***VIRTUAL_TOWERS*** includes time series profiles of eastward (***ua***) wind and northward wind (***va***) vectors (time resolution of ca. 15 min). Information about processing of variables is given in the global attributes and in the attributes for the individual variables in each NetCDF-file.
(Abstract) This dataset of meteorological observations (temperature, humidity, wind) was collected during four field campaigns in Stuttgart, Germany, in summer 2017, winter 2017, summer 2018, and winter 2018. Doppler lidars and a microwave radiometer were deployed to investigate horizontal structures of intra-urban horizontal wind field patterns and vertical structures of the urban boundary layer. The measurements were conducted within the project ‘Three-dimensional Observation of Atmospheric Processes in Cities’ (3DO). 3DO is one of three modules of the programme ‘Urban Climate Under Change’, [UC]2, funded by the German Federal Ministry of Education and Research (BMBF). More information on the goals of the UC]2 programme can be found on http://www.uc2-program.org/ and in the overview papers listed below. Dieter Scherer, Felix Ament, Stefan Emeis, Ute Fehrenbach, Bernd Leitl, Katharina Scherber, Christoph Schneider, and Ulrich Vogt (2019): Three-Dimensional Observation of Atmospheric Processes in Cities. Meteorologische Zeitschrift 2, 2019. doi: 10.1127/metz/2019/0909. Dieter Scherer, Florian Antretter, Steffen Bender, Jörg Cortekar, Stefan Emeis, Ute Fehrenbach, Günter Gross, Guido Halbig, Jens Hasse, Björn Maronga, Siegfried Raasch, und Katharina Scherber (2019): Urban Climate Under Change [UC]2 – A National Research Programme for Developing a Building-Resolving Atmospheric Model for Entire City Regions. Meteorologische Zeitschrift 2, 2019. doi:10.1127/metz/2019/0913.
(Technical Remarks) ### **DATA SET DESCRIPTION** ### **1. Spatial coverage** The measuring data were collected during intensive observation periods (IOP) in Stuttgart, Germany, under the BMBF Programme ‘Urban Climate Under Change’ [UC]2. ### **2. Temporal coverage** 01.02.2017 - 31.08.2018 ### **3. Data file structure and variables** The parent UC2_IMK_TRO_KIT data folder contains archived directories, corresponding to a particular measuring device (***WINDCUBE8, RPG_HATPRO_G4*** and ***VIRTUAL_TOWERS*** ). ***WINDCUBE8*** folder contains files of wind vectors measurements at different heights retrieved from Windlidar WINDCUBE8. ***RPG_HATPRO_G4*** folder contains data files from microwave radiometer measurements. The stored variables are cloud liquid water content, atmosphere mass content of water vapor, infrared radiometer brightness temperature, air pressure, as well as vertical temperature profiles and vertical absolute humidity profiles. ***VIRTUAL_TOWERS*** folder contains profiles of horizontal wind retrieved with the dual-Doppler Lidar technique ‘Virtual towers’. ### **4. Devices and Locations** The Doppler wind lidar WINDCUBE8 (WLS8-3 manufactured by Leosphere) was located on a rooftop of the city hall in the city centre (48.774667°N / 9.178287°E). The name of this location is cityhall. This abbreviation is the part of file name; see paragraph 6. The microwave radiometer (RPG HATPRO G4) manufactured by RPG-Radiometer Physics GmbH was located on a rooftop of the city hall tower in the city centre (48.775017°N / 9.177928°E). The name of this location is cityhalltow. This abbreviation is the part of file name; see paragraph 6. The six virtual towers were located in the Stuttgart city basin and in the Neckar valley. The names and coordinates of the six virtual towers are: wolfram (48.792912°N / 9.180950°E), citycannstat (48.788833°N / 9.190096°E), citywera (48.787575°N / 9.194673°E), naehter (48.780160°N / 9.226197°E), bcmercedes (48.787883°N / 9.233923°E), uthbherzogen (48.794566°N / 9.245064°E). These abbreviations are the parts of file names; see paragraph 6. ### **5. Type of files** WINDCUBE8, RPG_HATPRO_G4, VIRTUAL_TOWERS folders contain NetCDF-files created using Matlab R2016b regarding CF-1.7 convention. ### **6. The file name** The name of the NetCDF-file consists of some abbreviations: ***campaign-location-site-acronym-data_content-origin_date-version.nc*** Example: ***IOP02-S-cityhall-KITimktro-meteo-20170815-1.nc*** ***campaign***: IOP0X , where X is the number of an IOP. X=1: February-March 2017. X=2: June-August 2018. X=3: January-March 2018. X=4: June-August 2018. ***location***: S indicates Stuttgart. ***site***: i.e cityhall stands for location of WINDCUBE8. See paragraph 4. ***acronym***: KITimktro, stands for Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research, Department Troposphere Research. ***origin_date***: measuring date in the format YYYYMMDD (year, month, day) YYYYMMDD. ***version***: 1 ***data_content***: see paragraph 7. ### **7. Data content** ***WINDCUBE8*** folder contains data files with two different data contents: ***meteo*** and ***w***. The data file with the content ***meteo*** includes time series profiles of eastward (***ua***) wind and northward wind (***va***) vectors averaged over 10 minutes periods. The data file with the content ***w*** includes time series profile of vertical wind velocity (time resolution of 7 sec). ***RPG_HATPRO_G4*** folder contains data files with three different data types: ***meteo***, ***ta***, ***haa***. ***meteo*** includes time series of atmosphere cloud liquid water content (***lwp***), atmosphere mass content of water vapor (***prw***), infrared radiometer brightness temperature (***tb***), and air pressure (***plev***) from microwave radiometer measurement (time resolution of 4 sec). ta includes vertical temperature profiles (time resolution of 15 min) and ***haa*** contains vertical absolute humidity profiles (time resolution of 4 sec). ***VIRTUAL_TOWERS*** includes time series profiles of eastward (***ua***) wind and northward wind (***va***) vectors (time resolution of ca. 15 min). Information about processing of variables is given in the global attributes and in the attributes for the individual variables in each NetCDF-file.
Schlagworte:
eastward wind
northward wind
vertical velocity
wind profiles
lidar
Stuttgart
KITcube
atmosphere cloud liquid water content
atmosphere mass content of water vapor
infrared radiometer brightness temperature
air pressure
microwave radiometer HATPRO
absolute humidity profile
air temperature profile
virtual tower
dual-Doppler lidar technique
northward wind
vertical velocity
wind profiles
lidar
Stuttgart
KITcube
atmosphere cloud liquid water content
atmosphere mass content of water vapor
infrared radiometer brightness temperature
air pressure
microwave radiometer HATPRO
absolute humidity profile
air temperature profile
virtual tower
dual-Doppler lidar technique
Sprache:
-
Herausgeber/in:
Erstellungsjahr:
Fachgebiet:
Geological Science
Objekttyp:
Dataset
Datenquelle:
-
Verwendete Software:
-
Datenverarbeitung:
-
Erscheinungsjahr:
Rechteinhaber/in:
KIT
Förderung:
-
Zugriffe der letzten sechs Monate
●
Aufrufe der Datenpaket-Seite
● Downloads des Datenpakets
175
● Downloads des Datenpakets
3
Gesamtstatistik
| Zeitraum | Aufrufe der Datenpaket-Seite | Datenpaket heruntergeladen |
|---|---|---|
| Juli 2024 | 20 | 2 |
| Juni 2024 | 30 | 0 |
| Mai 2024 | 53 | 0 |
| Apr. 2024 | 31 | 0 |
| März 2024 | 21 | 0 |
| Feb. 2024 | 20 | 1 |
| Vorher | 97 | 1 |
| Gesamt | 272 | 4 |
Status:
Publiziert
Eingestellt von:
kitopen
Erstellt am:
Archivierungsdatum:
2023-06-21
Archivgröße:
1,6 GB
Archiversteller:
kitopen
Archiv-Prüfsumme:
0c9bb571521836b3b978e699770d56f5
(MD5)
DOI: 10.35097/1164
Publikationsdatum:
2023-06-21
Metadaten herunterladen
Statistik
272
Views
Views
4
Downloads
Downloads
Datenpaket zitieren
Kiseleva, Olga; Adler, Bianca; Kalthoff, Norbert; et al.
(2023): Data set of meteorological observations (wind, temperature, humidity) collected from a microwave radiometer and lidar measurements during four intensive observations periods in 2017 and 2018 in Stuttgart, Germany, under the BMBF Programme ‘Urban Climate Under Change’ [UC]2)..
Karlsruhe Institute of Technology.
DOI: 10.35097/1164