Datenpaket: KITcube Doppler lidar measurements from Gargazon, TEAMx, Level 2 wind profiles

Wind profiles processed from measurements of the Doppler lidar Leosphere WLS200s_159 located at Gargazon, Italy (46.5767°N, 11.2°E, 255 m) during the TEAMx field campaign from May to July 2025. The instrument was placed on a container with 2.59 m height. The heights and the altitude refer to the position of the instrument. For the wind profile calculation, DBS, vertical stares, and RHI scans are used. RHI scans were carried out in four directions (along- and cross-valley). The vertical profiles of the 3D wind vectors are calculated using AtmoProKIT v1.1 with the standard module chain (https://doi.org/10.5194/gmd-19-2497-2026). The default values of the standard module chain are used for all processing parameters, except of the minimum elevation angle. To avoid hard targets (surrounding mountains), the minimum elevation angle for considered measurements is set to 30°. The temporal resolution of the processed wind profiles is 10 min and the vertical resolution is 100 m.